Accessing the IP configuration menus

To access the IP menus, select Menu >Aux L/S>Info. The panel displays the Local Maintenance Menu (LLM). Select IP SETUP to enter the IP configuration menus.

Note:

If you enter PANEL INFO instead, you enter the maintenance menus. See IP menu map.

To communicate to EHX that the panel is ready to be identified, select IDENTIFYME.

The panel buttons or LEDs flash red and IDENTIFYME is displayed in the bottom left display screen. Select IDENTIFYME again (the Reply key) to cancel identify mode.

Identification mode can also be initiated in EHX, in which case the same display mode is seen.

Note:

If the LAN port is the only connection with the panel, the panel will automatically display the IP SETUP menu, prompting the user to enable the panel for IP access (if it is not already enabled (see above)).